Samson 3286 Скачать руководство пользователя страница 8

Страница: 8 / 56

EB 8257 EN

Safety instructions and measures

1.1 Notes on possible severe personal injury

DANGER

Risk of bursting in pressure equipment.

Control valves and pipelines are pressure equipment. Improper opening can lead to

valve components bursting.

Before starting any work on the control valve, depressurize all plant sections

concerned as well as the valve.

Drain the process medium from all the plant sections concerned as well as the
valve.

Wear personal protective equipment.

1.2 Notes on possible personal injury

WARNING

Crush hazard arising from moving parts.

The control valve contains moving parts (actuator and plug stems), which can injure
hands or fingers if inserted into the valve.

Do not insert hands or fingers into the yoke while the valve is in operation.

While working on the control valve, disconnect and lock the pneumatic air supply as

well as the control signal.

Risk of personal injury when the actuator vents.

While the valve is operating, the actuator may vent during closed-loop control or when

the valve opens or closes.

Install the control valve in such a way that the actuator does not vent at eye level.

Use suitable silencers and vent plugs.

Wear eye protection when working in close proximity to the control valve.

Содержание 3286

























































Результаты поиска

Содержание 3286

Отзывы:

Бренды по названию

Популярные бренды

Samson 3286, Монтаж и эксплуатация

Результаты поиска

Содержание 3286

Отзывы:

Бренды по названию

Популярные бренды