manualshive.com logo in svg

Samson 3286, Монтаж и эксплуатация

Поделиться
Скачать
Samson 3286 Скачать руководство пользователя страница 10

 10  

EB 8257 EN

Safety instructions and measures

NOTICE

!

Risk of valve damage due to unsuitable medium properties.

The valve is designed for steam and cooling water.

 

Î

Make sure that the steam and cooling water are clean and free of mineral 
components.

 

Î

Install strainers.

Risk of leakage and valve damage due to excessively high or low tightening torques.

Observe the specified torques on tightening control valve components. Excessively 
tightened torques lead to parts wearing out quicker. Parts that are too loose may cause 

leakage.

 

Î

Observe the specified tightening torques (

u

 AB 0100).

Risk of valve damage due to the use of unsuitable tools.

Certain tools are required to work on the valve.

 

Î

Only use tools approved by SAMSON (

u

 AB 0100).

Risk of valve damage due to the use of unsuitable lubricants.

The lubricants to be used depend on the valve material. Unsuitable lubricants may cor

-

rode and damage the valve surface.

 

Î

Only use lubricants approved by SAMSON (

u

 AB 0100).

Содержание 3286

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды