Samson 3275, Монтаж и эксплуатация

Страница: 8 / 32

8 EB 8314 EN
Safety instructions and measures
WARNING !
Risk of personal injury when the actuator vents.
While the valve is operating, the actuator may vent during closed-loop control or when
the valve opens or closes.
Î
Install the control valve in such a way that the actuator does not vent at eye level.
Î
Use suitable silencers and vent plugs.
Î
Wear eye protection when working in close proximity to the control valve.
1.3 Notes on possible property damage
NOTICE !
Risk of actuator damage due to excessively high or low tightening torques.
Observe the specified torques on tightening actuator components. Excessively tightened
torques lead to parts wearing out quicker. Parts that are not tightened far enough may
loosen.
Î
Observe the specified tightening torques (
u
AB 0100).
Risk of actuator damage due to the use of unsuitable lubricants.
The lubricants to be used depend on the actuator material. Unsuitable lubricants may
corrode and damage the valve surface.
Î
Only use lubricants approved by SAMSON (
u
AB 0100).