Samson 3244 Скачать руководство пользователя страница 36

Страница: 36 / 52

EB 8026 EN

Servicing

2. Undo the body nuts (14) gradually in a

criss-cross pattern.

3. Lift the flange (2) and plug with plug

stem (5) off the body (1).

4. Unthread the stem connector nut (9) and

lock nut (10) from the plug stem.

Unscrew the threaded bushing (8).

6. Pull the plug with plug stem (5) out of the

flange (2).

7. Pull all the packing parts out of the pack-

ing chamber using a suitable tool.

Renew damaged parts. Clean the pack-
ing chamber thoroughly.

Apply a suitable lubricant to all the pack-
ing parts and to the plug stem (5).

10. Slide the plug with plug stem (5) into the

valve body (1).

11. Place the flange (2) onto the body.

Mixing valve with V-port plug:

place the

flange (2) onto the body, making sure
that the largest V-shaped port of the
V-port plug faces toward the valve outlet
(

) at the side. See section 5.1.

12. Carefully slide the packing parts over the

plug stem into the packing chamber us-
ing a suitable tool. Make sure to observe
the proper sequence (see Fig. 8).

13.

Diverting valve:

firmly press the plug (5)

into the top seat (4).

Mixing valve:

firmly press the plug (5)

into the bottom seat (141).
Fasten down the flange (2) with the body
nuts (14). Tighten the nuts gradually in a
criss-cross pattern. Observe tightening
torques.

14. Screw in the threaded bushing (8) and

tighten it. Observe tightening torques.

15. Loosely screw the lock nut (10) and stem

connector nut (9) onto the plug stem.

16. Mount actuator. See associated actuator

documentation.

17. Adjust lower or upper signal bench

range. See associated actuator docu-

mentation.

ADSEAL packing

1. Proceed as described in Standard pack-

ing (PTFE), steps 1 to 11.

2. Slide the parts of the packing over the

plug stem in the specified order:

−

Spring (11)

−

Washer (12)

−

Packing rings (16)

3. Slide the seals (15.2) over the plug stem.

Insert the wire of the red spacer ring
(15.1) into the groove of the retaining

ring.

Slide the retaining ring over the plug

stem.

4. Insert the red spacer ring (15.1) between

the threaded bushing (8) and retaining
ring. See Fig. 8.

Proceed as described in Standard pack-
ing (PTFE), steps 13 to 17.

7.2.2 Version with insulating

section

Standard packing (PTFE)

1. Remove the actuator from the valve. See

associated actuator documentation.

Содержание 3244





















































Результаты поиска

Содержание 3244

Отзывы:

Похожие инструкции для 3244

Бренды по названию

Популярные бренды

Samson 3244, Руководство по эксплуатации

Результаты поиска

Содержание 3244

Отзывы:

Похожие инструкции для 3244

Бренды по названию

Популярные бренды