Samson 3244 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 52

Samson 3244 Скачать руководство пользователя страница 20

20

EB 8026 EN

Measures for preparation

4 Measures for preparation

After receiving the shipment, proceed as fol-
lows:
1. Check the scope of delivery. Compare

the shipment received against the deliv-

ery note.

2. Check the shipment for transportation

damage. Report any damage to

SAMSON

and the forwarding agent (re-

fer to delivery note).

4.1 Unpacking

Do not remove the packaging until immedi

-

ately before installing the valve into the pipe

-

line.

Proceed as follows to lift and install the
valve:
1. Remove the packaging from the valve.
2. Dispose of the packaging in accordance

with the valid regulations.

Risk of valve damage due to foreign parti

-

cles entering the valve.
The protective caps fitted on the valve's inlet
and outlet prevent foreign particles from en

-

tering the valve and damaging it.
Do not remove the protective caps until im

-

mediately before installing the valve into the
pipeline.

4.2 Transporting and lifting

Hazard due to suspended loads falling.
Stay clear of suspended or moving loads.

Risk of lifting equipment tipping and risk of
damage to lifting accessories due to exceed

-

ing the rated lifting capacity.

−

Only use approved lifting equipment and
accessories whose minimum lifting
capacity is higher than the weight of the
valve (including actuator, if applicable).

−

Refer to section 3.3 or Data Sheet

u

T 8026 for weights.

Risk of personal injury due to control valve
tipping.

−

Observe the valve's center of gravity.

−

Secure the valve against tipping over or
turning.

Risk of valve damage due to incorrectly at

-

tached slings.
The welded‑on lifting eyelet on SAMSON
actuators is only intended for mounting and
removing the actuator as well as lifting the
actuator without valve. Do not use this lifting
eyelet to lift the entire control valve assembly.

Note

NOTICE

!

DANGER

!

WARNING

!

WARNING

!

NOTICE

!

«
...
18
19
20
21
22
...
»

Содержание 3244





















































Отзывы:

Нет отзывов