SAMSON PUMPS OCEAN MASTER SVF27, Инструкция по эксплуатации

Страница: 16 / 32

16
3.6 Service liquid requirement
If sea water is used as sealing water, it is recommended to flush the pump with fresh water after use and
drain the pump afterwards.
Before the pump is started again, remember to fill the pump to about shaft height before start up.
Otherwise the pump will be started with dry run of the mechanical shaft seals, which will shorten the
lifetime.
A drain valve mounted in the pump will help to identify the correct level of water. See below.
DOC1627349_11
DOC1627349_11