Samsara CM33, Руководство пользователя, Страница: 3 / 25

3 samsara.com/support © 2024 Samsara Inc.
CM34
Hex M2
Hex M3
CM33 & CM34
1
samsara.com/activate
LTE
Armadillo Van Transpor t
Select Language
Install Devices
Send Feedback
Sign Out
>
>
>
>
Fleet Alerts Settings Support
Make sure your Vehicle Gateway is installed and
activated. This can be completed on the Samsara
Dashboard or on the Samsara Fleet App .
Make sure the vehicle is in an area with reliable
cellular connection during installation.
2
Identify the mounting location on the windshield
and thoroughly clean with alcohol wipe. For optimal
visibility, the camera should be positioned below the
rear view mirror, within the windshield wiper sweep.
See mounting tips for US & UK . Ensure clearance for
Allen key access on both sides of the device.
3
4a
Use the larger end (Hex M3) of the Allen key to
loosen both mount screws before adjusting. Rotate
the camera body so it hangs perfectly vertical, then
lightly tighten the screws. Do not fully tighten until
after the camera positioning is validated (Step 7).
For Front-Facing AI Dash Cam CM33, skip to Step 5.
For Dual-Facing AI Dash Cam CM34, go to Step 4b.
30s
4b
CM34 Only:
Use the smaller end (Hex M2) of the Allen key to
loosen the inward facing camera screw before
adjusting. Angle the lens towards the center of the
cabin. Do not fully tighten the screw until after the
camera positioning is validated (Step 7).
Peel off the adhesive liner and firmly press the camera against the windshield for 30 seconds. Make sure there
are no large bubbles between adhesive and glass. Peel the protective film off the camera lens(es).
Note: If using the mount for angled windshield (ACC-CM-BSHIM), install it onto the camera before mounting to
the windshield.
Please make sure to update the app to the
latest version before starting installation.