Sams DA-12fs, Руководство пользователя по эксплуатации и обслуживанию

Страница: 20 / 24

DAC
Converters
elektronik
Sams elektronik d.o.o. • sams@sams.rs • www.sams.rs
20
Once you have selected the option, press the “MENU / BACK” button. Option is temporarily saved.
Menu - Color Framing
6. COLOR FRAMING
This menu is used to set the color framing.
Due to the different length cables for external references, it is sometimes necessary to change the PAL
sequence start.
NOTE: Color framing in a given field work only when connected to an external reference.
The default setting is Frame is 0.
Select an option by pressing the UP / DOWN keys.
Sel.Menu
CFraming
MENU / BACK
OK / SAVE
DOWN
UP
Ulaz reference Poluslika 0 1 2 3
3 0 1 2
3 0 1 2
Talasni oblik
burst-a
Poluslika
Talasni oblik
burst-a
Poluslika
Talasni oblik
burst-a
Izlaz reference
(Frame 0)
Izlaz reference
(Frame 1)
Overview of possible values
Once you have selected the option, press the “MENU / BACK” button. Option is temporarily saved.
Menu - Error mode
7. ERROR MODE
This menu is used to set how the product behaves during a fault in the signal.
Select an option:
- PASS ALL - device pass signal no matter how bad signal is;
- FRAME - the device will freeze the last good picture due to poor incoming video signal;
- FIELD 1 - the device will freeze in the first field due to poor incoming video signal;
- FIELD 2 - the device will freeze the second field, due to poor incoming video signal;
- BLACK - the unit will generate a black image, due to poor incoming video signal;
- 75% COLOR BAR - the unit will generate a color bar, due to poor incoming video signal;
- KILL OUT - device will cancel the signal at the output due to poor incoming video signal;
The factory setting is FIELD 1.
Select an option by pressing the UP / DOWN keys.
Sel.Menu
Err.Mode
MENU / BACK
OK / SAVE
DOWN
UP