SamplexPower SEC-1212P, Руководство пользователя

Страница: 7 / 24

SAMLEX AMERICA INC. | 7
SECTION 2 | Layout & Dimensions
2.3 SEC-1235P-M
4
3
4
3
7
5
Overall Dimension: 185 x 208.5 x 57.8 mm
(with protrusions) 7.28 x 8.21 x 2.28 in
[W x D x H]
6 Bottom View
190
57.8 4.5
180 180
185
2.5
2.5
208.5
4.5
53.3
57.8
2
8
1
5
10
10
9
11
LEGEND for Fig 2.3
1. Lighted Power ON/OFF Rocker Switch (Lights Red when ON)
2. AC Power Cord Inlet: Type “IEC 60320-C14” for detachable power cord with “IEC 60320-C13”
connector on one end and country specific plug on the other end.
3. Black Negative (-) DC Load Terminal
Ÿ
Tubular hole Dia 5mm/0.2” and set screw (5/64” Hex Socket Head, #10, 24 TPI,
5/16” long)
*See Note 2
4. Red Positive (+) DC Load Terminal
Ÿ
Tubular hole Dia 5mm/0.2” and set screw (5/64” Hex Socket Head, #10, 24 TPI,
5/16” long)
*See Note 2
5. Air inlet slots on the top cover for cooling fan suction
6. Air inlet slots in the bottom housing for cooling fan suction
7. Lanced tab that slides into corresponding slot in the bottom housing. (There is one more lanced tab
on the other corresponding side of the top cover). This ensures that the top cover fits properly only in
one orientation i.e. ventilation slots 5 positioned away from the fan discharge openings 8 .
8. Ventilation openings for fan discharge (outwards). Fan is located behind the ventilation openings.
9. Lighted Volt and Ammeter:
Ÿ Voltmeter: 0 to 15V ; 0.5V per division
Ÿ Ammeter: 0 to 50A ; 2A per division
10. Screw adjustment for mechanical zeroising of Voltmeter and Ammeter needles.
11. On/Off Push Button for meter back light.
NOTES: 1. The top cover will fit properly only when the 2 lanced tabs (7, Fig 2.3) are oriented
towards the DC output terminals 3 and 4 .
2(a). 5/64” Hex Key and 2 spare set screws have been provided.
2(b). 2 pieces of Pin Type Terminals (for wire size up to AWG#8) have also been provided for
crimping to bare stranded wire ends of load wiring for firm contact under the set screws.
Figure 2.3 Layout & Dimensions - SEC-1235P-M