SamplexPower SEC-1212P, Руководство пользователя

Страница: 4 / 24

4 | SAMLEX AMERICA INC.
1.3 GENERAL
Please read before using your power supply:
a) It Is recommended that you return your power supply to a qualified Samlex dealer for
any service or repair. Incorrect assembly may result in electric shock or fire.
b) To reduce the risk of electric shock, unplug the power supply from the outlet before
attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
c) An extension cord should not be used unless absolutely necessary. If an extension cord
must be used, make sure that the pins on the plug are the same number, size and
shape as those of the country specific power cord plug. Also, the voltage and current
specs of the extension cord should match the voltages and current capacities of the
power supply.
d) Place the unit in an area that will allow air to flow freely around the unit. DO NOT
BLOCK OR OBSTRUCT vent openings on the sides of the unit.
e) Keep the unit away from moisture and water.
f) NEVER operate the units in parallel.
1.4 GROUNDING
WARNING!
Your power supply should be grounded to reduce the risk of electric shock. The
power supply is equipped with grounding provision in the IEC 320-C14 Power
Cord Inlet.
Country specific power cord must be plugged into an outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
Improper connection can result in risk of electric shock.
MISE EN GARDE!
Votre alimentation doit être mis à la terre pour réduire le risque de choc électrique.
L’alimentation est équipé d’un disposition de la mise à la terre IEC 320-C14 Cordon
d’Inlet.
Le cordon doit être branché dans une prise de courant correctement installée
et mise à la terre conformément à tous les codes et règlements locaux. Une
connexion incorrecte peut entraîner un risque de choc électrique.
1.5 CONNECTION TO A BATTERY
DO NOT USE THE POWER SUPPLY FOR DIRECT CHARGING OF BATTERY OR DIRECT
CONNECTION TO A BATTERY FOR BATTERY BACK-UP. (Please read Section 3.5).
SECTION 1 | Important Safety Instructions