background image

38  |  SAMLEX AMERICA INC.    

 

2 year LimiteD Warranty

SAM-1500C-12 manufactured by Samlex America, Inc. (the “Warrantor“) is war

-

ranted to be free from defects in workmanship and materials under normal use 
and service. The warranty period is 2 years for the United States and Canada, and is 

in effect from the date of purchase by the user (the “Purchaser“). 

Warranty outside of the United States and Canada is limited to 6 months. for a 
warranty claim, the Purchaser should contact the place of purchase to obtain a 

Return Authorization Number. 
The defective part or unit should be returned at the Purchaser’s expense to the 
authorized location. A written statement describing the nature of the defect, the 

date of purchase, the place of purchase, and the Purchaser’s name, address and 
telephone number should also be included. 

If upon the Warrantor’s examination, the defect proves to be the result of defec

-

tive material or workmanship, the equipment will be repaired or replaced at the 
Warrantor’s option without charge, and returned to the Purchaser at the Warran-

tor’s expense. (Contiguous US and Canada only) 

No refund of the purchase price will be granted to the Purchaser, unless the War-
rantor is unable to remedy the defect after having a reasonable number of oppor-
tunities to do so. Warranty service shall be performed only by the Warrantor. Any 
attempt to remedy the defect by anyone other than the Warrantor shall render 
this warranty void. There shall be no warranty for defects or damages caused by 

faulty installation or hook-up, abuse or misuse of the equipment including expo

-

sure to excessive heat, salt or fresh water spray, or water immersion. 
No other express warranty is hereby given and there are no warranties which ex

-

tend beyond those described herein. This warranty is expressly in lieu of any other 
expressed or implied warranties, including any implied warranty of merchantabil

-

ity, fitness for the ordinary purposes for which such goods are used, or fitness for 
a particular purpose, or any other obligations on the part of the Warrantor or its 
employees and representatives. 

There shall be no responsibility or liability whatsoever on the part of the Warran-
tor or its employees and representatives for injury to any persons, or damage to 
person or persons, or damage to property, or loss of income or profit, or any other 
consequential or resulting damage which may be claimed to have been incurred 
through the use or sale of the equipment, including any possible failure of mal-
function of the equipment, or part thereof. The Warrantor assumes no liability for 
incidental or consequential damages of any kind.

Samlex america inc. (the “Warrantor”)
www.samlexamerica.com

SeCTIOn 8  |  

warranty

Содержание SAM Series









































Отзывы: