H5
www.samon.nl - [email protected]
V1-2016-NL
4.
Inspect before and during use.
WARNING!!!
When performing maintenance on the SAMON Onion loader always switch the tractor engine off and
remove the key from the ignition.
4.1
Checks needed before use.
Check the entire hydraulic system for leaks.
Check the tire pressure. (2.5 Bar)
Check if the locking clips and safety cords are in place.
Check the protection covers for damage.
Check the sieve and elevator belt for damage and wear.
Check the drive wheels and rollers for wear.
Check the safety bolts of the wheels.
Check the tension of the elevator belt. (6.2)
Check if the elevator is running correctly on the rollers.
Check the tension of the drive chain (between the hydraulic motor and elevator belt)
Check the scrapers for war.
4.2
Check needed during use.
Check the depth of the intake, make sure it goes about 1 cm through the ground.
Check the onions for damage.
Check the wheel track.
Check the tiller ends and the tillers for wear, particularly the bottom and inner sides. The tillers are
there to protect the frame of the SAMON Onion Loader, so make sure to replace early to prevent
damage to the frame or bearings.
WARNING!!!
Due to the various compositions of soil types it is possible that the tillers could wear out faster. Inspect
them regularly to prevent damage to the SAMON Onion loader.
5.
Operating.
