Samoa LARIUS VIKING, Руководство по эксплуатации и техническому обслуживанию

Страница: 14 / 28

www.larius.com 12
VIKING
ED. 03 - 09/2020 - Cod. 150163
WARNING :
If the equipment is still under pressure after performing the operations above described because of the nozzle
or the flexible hose clogged, proceed as follows:
• Loosen very slowly the gun nozzle.
• Release the clamp.
• Point the gun at the container of the product and press the trigger to release pressure.
• Loosen very slowly the fitting of connection from the flexible hose to the gun.
• Clean or replace the flexible hose and the nozzle.
CORRECT PROCEDURE OF DECOMPRESSION
• Insert the gun clamp (N1) .
• Move the ON/OFF switch (N2) to the OFF position (0) to
stop the equipment.
• Disconnect the power supply cable (N3) .
• Release the gun clamp (N4) . Point the gun at the tank of the
product and press the trigger to release pressure. At the end
of the operation, insert the gun clamp.
• Open the re-circulation valve (N5) to release residual pressure.
OFF
0
N5
N2
N1
N3
N4
N
Fig. 1N
Fig. 2N Fig. 3N Fig. 4N