www.larius.com
10
THOR
ED.
17 - 09/2020 - Cod. 150096
Fig. 1H
Fig. 2H
If the product to be used is toxic, avoid inhalation
and contact by using protection gloves, goggles
and proper face shields.
Make sure that the electrical system is earthed and
complies with regulations.
Never attempt to tamper with the calibre of
instruments.
H
Always check the product is compatible with the
materials composing the equipment (pump, spray
gun, flexible hose and accessories) with which it
can come into contact. Never use paints or solvents
containing halogen hydrocarbons (as the methylene
chloride).
If these products come into contact with aluminium
parts can provoke dangerous chemical reactions
with risk of corrosion and explosion.
H2
H3
H1
CHECK ON POWER SUPPLY
Electrical safety precautions
• Check the switch is on the “OFF” position before connecting
the cable to the mains
.
• Never carry a plugged-in equipment
.
• Disconnect the equipment before storing it and before perfor
-
ming any maintenance operation or replacing of accessories
.
• Do not carry the equipment neither unplug it by pulling the
electric cable
.
•
Protect the cable from heat, oil and sharp edges
.
• When the tool is used outdoors, use only an extension cable
suited for outdoor use and so marked
.
• Take care when the pumping rod is moving.
Stop the machine whenever someone is within its vicinity
.
• Repairs of the electrical equipment should only be carried
out by skilled personnel, otherwise considerable danger to
the user may result.
•
Check the mains voltage corresponds to the equipment’s
rating.
SETTING-UP
CONNECTION OF THE FLEXIBLE HOSE TO THE GUN
• Connect the high pressure flexible hose (
H1
)
to the pump
(
H2
)
and to the gun
(
H3
), ensuring to tighten the fittings (
the
use of two wrenches is suggested
)
.
NEVER
use sealants on fittings’ threads
.
• It is recommended to use the hose provided with the standard
kit (
ref.18036
)
.
NEVER
use a damaged or a repaired flexible hose
.
Take proper safety measures for the protection of
hearing in case of work near the plant.
It is recommended to use the hose provided with the standard
kit (
ref.18036
)
.
NEVER
use a damaged or a repaired flexible hose
.
