www.larius.com
3
STAR 3001W
ED.
11 - 01/2021 - Cod. 150190
B
Fig. 1B
GENERAL DESCRIPTION
LARIUS STAR 3001
automatic and manual guns are used for water-borne electrostatic liquid coating. With this kind of application
the paint particles are electrically charged and then atomized to the workpiece in order to perfom an even and improved finishing of
the whole surface.
•
Max operating voltage 90 Kv
•
Max operating pressure 200 bar (airless models)
•
Max weight of the manual guns 750 g
•
IP 56 protection for gun - control box system
•
Voltage management directly from the gun through pre-set values
•
New electronic-pneumatic control boxes thanks to new technology components
•
Easy touch screen interface in the electronic box
•
Higher performance for nozzles for an easy assembly and maintenance
•
The gun is equipped with a probe to verify the resistivity of the paint, in order to ensure an optimal electrostatic winding.
•
The gun is extremely easy handling due to low weight and ergonomics of the handle that can be adapted to the shape of the
operator’s hand thanks to the fully adjustable finger rest.
•
The gun is built with a special technical result of extensive research to provide the best available on the market.
•
The seals inside the gun are entirely composed of materials of last generation, chemically inert to solvents, oils and paints. This
ensures the best resistance offered until now by a producer to ensure maximum reliability, efficiency and durability of the life
cycle of the gun.
•
The gun has an adjustable display directly on the gun for choosing the parameters of the working voltage, previously set by
the operator on the electric generator. It’s also possible register up to three different levels of working conditions for the same
type of paint.
•
In the low pressure painting, where it requires the adjustment of the stroke of the trigger, the function can be exerted directly on
the gun, simply by acting with the other hand on the same adjustment.
•
The maintenance, assembly and disassembly of the gun are really simple thanks to the gun body made up of two units and the
handle and removable front. All without the need to use tools because each component is instantaneously visible and verifiable.
•
The gun allows you to paint both water-based and solvent-based removing and replacing only the front.
•
Insulating box to change from solvent-based paint to water-based paint is not required. Our gun is equipped with two lateral
outlets, in highly resistant material, which bring externally the charge to water-based paint, thus preventing the “rebound” effect
of this highly conductive paint. This means lower costs related to the preparation of high insulating box, reducing the size of the
work area and increasing operator safety.
