Samoa LARIUS NOVA 20:1 EXT, Руководство пользователя, Страница: 17 / 34

N56 N57 N53 N54 N55 N56
N53
N68
N67
N66
N69
N63
N60
N58
N64
N65
N66
N59
N61
N62
ED. 03 - 10/2020 - Cod. 150087
www.larius.com 15
nova 20:1 ext
• Insert the springs (
N54
) and the valves (
N55
) into the seat (
N53
).
Position the seat on the pump support and lay the manifold
(
N56
) on the seat [do not forget the gasket (
N57
)].
• Fasten the manifold with screws
(do not tighten)
ensuring
it is perfectly parallel to the other manifold and the
distance between them is 46 mm
(see illustration)
.
The distance between the walls of the manifold and the edge
of the seat must be about 0,8 mm.
• Rub the rollers (
N58
) and the pins (
N59
) with vaseline grease
and insert them into the mount (
N60
).
• Rub the rubber pad (
N61
) and the washer (
N62
) with vaseline
grease and insert them into the mount (
N60
).
• Grease the roller pushing pistons (
N63
), the spring guide rods
(
N64
), the springs (
N65
) and insert them into the mount (
N60
).
• Fasten without tightening the ring nuts (
N66
) on the mount
(
N60
).
• Fasten the mount on the manifolds and tighten the screws
(
N68
) [do not forget of washer (
N67
)].
• Tighten the ring nuts (
N66
) and the screws (
N69
).
• Assemble again the covering and all the fittings of the air supply
line.
Fig. 9N
Fig. 10N