www.larius.com
13
REV.
1 - 06/2020 - Cod. 150142
K
Fig.5J
Fig. 4J
J4
K1
K2
Fig. 1K
Fig. 2K
Fig. 3K
J2
Closed
K3
Aperto
Miro' for sanitation
NEVER point the spray gun at yourselves or at
other people. The contact with the casting can
use serious injuries. In case of injuries caused by
the gun casting, seek immediate medical advice
specifying the type of the product injected.
CLEANING AT THE END WORK
SPRAY ADJUSTMENT
• Slowly turn clockwise the pressure control knob to reach
the pressure value in order to ensure a good atomization of
the product.
• An irregular and marked spray on the sides indicates a low
working pressure. On the contrary, a too high pressure
causes a high fog (
“overspray”
) and waste of product.
• Make sure the product recycles from the return tube (
J4
).
• The pump is now ready for use.
• Close the re-circulation tap (
J2
).
•
Fill the tank (
K5
) with the cleaning liquid.
• Ensure the gun (
K2
) is without nozzle.
• Open the re-circulation tap (
K3
).
Содержание LARIUS MIRO
Страница 33: ...I n t e n t i o n a l l y b l a n k p a g e...
Страница 36: ...I n t e n t i o n a l l y b l a n k p a g e...
