1
DISMANTLING AND REASSEMBLING THE PNEUMATIC MOTOR
Procedure
1.1
Close the compressed air supply to the pump
and release the residual pressure in the plant.
1.2
Unscrew the motor cap (
1a
) and pull it upwards
together with the guide rod (
1b
) (
1e
)
1.3
Hold the guide rod (
1b
) and remove the plug (
1a
)
(using two wrenches).
Necessary tools and equipment
1a
1b
1a
1b
1c
1a
1b
1c
1c
1d
1c
1e
www.larius.com
26
SIRIO 60:1
ED.
04 - 11/2020 - Cod. 150170
O
1.4 Replace immediately the plug with a usual
M8
(
1C
)
nut before the guide rod
(
1B
)
slides
into the cylinder
(
1D
).
Fig. 1O
