Samlex Europe SEC-1212G, Руководство пользователя, Страница: 4 / 13

DESCRIPTION
SEC-1212G, SEC-1225G and SEC 1235 are switched mode power supplies which convert
, 50 H to regulated 13.8 VDC based on pulse width modulation ( PWM ) control.
The SEC-2412G converts 2 0Vac, 50 Hz to 27.6 VDC.
FEATURES
❒
Based on switched mode technology and PWM control
❒
Compact and lightweight
❒
❒
Protected against short circuit, over current and
❒
Over voltage (through PWM controller)
❒
SEC-1212G is convection cooled. SEC-1225G/1235 and 2412G have forced
❒
Air cooling and over temperature shut down
❒
Fully approved Ce/LVD and safety
❒
Complies with european emission and immunity standards
CONNECTION AND OPERATION
NOTE! The DC output connector has a tubular hole of diameter 0.2” (5mm) with a set
screw. F
of your 12V DC or 24V DCdevice.
Ensure that the power supply’s ON/OFF switch is off and it is unplugged from the AC
outlet. Switch off your 12 or 24V DC device and connect it’s positive and negative to the
RED ( Positive ) and WHITE ( Negative ) terminals respectively. Ensure that the connections
are secure and tight. Plug the power supply into the AC outlet. Press the ON/Off switch of
the power supply to ON and observe that the neon indicator in the switch illuminates. If
the indicator fails to light , recheck the connection, AC outlet and the fuse inside the
power supply.
Your 12 or 24V DC device may now be switched on.
2