SAMIX BR200 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 40

SAMIX BR200 Скачать руководство пользователя страница 34

SAMIX

®

BR200

34

Observe the following information:

•

Services are also invoiced within the warranty period for costs and wear parts.

•

Upon request, a replacement device is provided for the duration of the service work

in return for a one-off rental charge.

NOTICE

Please note the information in the enclosed documentation for warranty cases.

7.3

Cleaning

WARNING

Electrical hazard from direct contact with live parts!
Always remove the connector from the socket before cleaning the SAMIX

®

BR200.

ATTENTION

Risk of material damage!
Do not open the housing of the SAMIX

®

BR200 without authorization.

Do not use any aggressive cleaning substances or abrasive cleaners for cleaning.
Ensure that no liquid enters the device. If liquid ends up in the inside of the SAMIX

®

BR200,

disconnect the device from the power supply and inform customer service.

Proceed as follows for daily cleaning of the device:
1. Disconnect the connector from the socket.
2. Wipe the surfaces of the device using a damp cloth (wet with mild soapy water).
3. Dry the surfaces of the device using a soft, dry cloth.

«
...
32
33
34
35
36
...
»

Содержание BR200









































Отзывы:

Нет отзывов