25
Change the Reverb Type
While holding the [REVERB] button, use the [TRANSPOSE] buttons to select
a Reverb Type. The LCD will show the current Reverb Depth and Type.
Once you have selected the desired Reverb Type, let go of the Reverb button,
and resume playing DCP-12.
REVERB
TRANSPOSE
The following Reverb Types are available:
01 02
03
04
05
06
07
08
ROOM1
ROOM2
ROOM3
HALL1
HALL2
PLATE
DELAY PANDELAY
Each of the 16 voices of DCP-12 will remember its individual Reverb on/off
status, Type and Depth setting, even after turning the Power switch off and on.
Chorus Effect
The built-in digital Chorus can be used for adding a rich, swirling stereo effect
to any of the 16 voices built into DCP-12.
Apply Chorus to a Voice
Press the [CHORUS] button.
The button will illuminate, and you will hear the Chorus effect when you play
the currently selected voice.
To turn Chorus off, press the Chorus button again. The button will go dark to
indicate that Chorus is off.
CHORUS
NOTE
Depending on the default Depth setting for the selected Chorus preset, the
effect may be quite subtle. To hear the Chorus more clearly, you may want
to increase the Chorus Depth, as described in the next step.
