Sames Inocoat Inogun M, Инструкция по эксплуатации

Страница: 37 / 69

37
DRT7132
D - 2022 /09
Member of Exel group
• Step 4 : Control box replacement
1 Push the plug into the grip of the handle
2 Insert the REED light into its housing with the wires
facing down as far as they will go.
3 Place the wires on the opposite side of the air
channel.
4 Place the control box at the bottom of the handle.
5 Screw then tighten the 5 screws KA30x10
crosswise to a torque of 0.45 N.m.
6 Then follow steps 3 to 6 of step 5 of procedure D2
( see § 6.4.7 page 34 ).
2 4
1
3
5