Sames Inocoat Inogun M, Инструкция по эксплуатации

Страница: 35 / 69

35
DRT7132
D - 2022 /09
Member of Exel group
• Step 5: Replace the LV cable.
1 Insert the connector (1) connecting the HVU into
the handle. Leave enough space to correctly
reposition the powder duct.
2 Insert the powder duct into the handle, making
sure not to pinch the wires.
3 Connect the blue connector (2) connecting the
control box.
4 Position the base plate on the handle. Push the
powder duct onto the base plate.
5 Screw then tighten the assembly with the 3 KA 30
screws and washers on the handle with a torque of
0.65 N.m.
6 Reconnect the powder and air hoses.
1
2