Sames Inocart NDT, Инструкция по эксплуатации

Страница: 17 / 36

17 Member of Exel group
DRT7161
B - 2023/10
5. Start up
5.1. Specific tool
None.
5.2. Installation
The Inocart NDT or HF carts are delivered assembled.
• Step 1 : Connect the ground cable of the cart to a
conductive and earthed part of the spray booth; the
ground potential must be identical to that of the part
to be powdered.
• Step 1 :: Attach the tank support to the base of the
cart using the 4 screws 8 x 25 provided.
• Step 2 : Connect the air supply and ground wire to
the tank:
Gun powder supply hose ( 1 )
Green/yellow wire: ground ( 2 ).
Hose 4/6: dilution air for fluidization ( 3 )
Hose 6/8: injection air ( 4 ).
• Step 3 : Connect the 5 m earthing cable to an
electrically earthed part of the application booth.
• Step 4 : Connect the Inobox's power supply plug.
• Step 5 : Connect the electrode blowing hose on
the Inobox module side and on the gun side.
The cart is ready to start the powder application.
2
3
4
1