Index revision : H
27
6336
6.10. Screen “F”
This screen is used to select the powder supply (vibrating table or fluidisation tank), therefore only in the
case of a manual unit with no connection to a PLC.
[
[
1
1
]
]
: This button enables selection of the
powder-supply mode.
Pressing this button moves the flashing cur-
sor in front of the operating mode.
[
[
2
2
]
]
: This button enables
switching to the following
menu or positioning on the
cleaning screen by pressing
the button for more than two
seconds.
Pressing the button validates the parameters
and the operator has access to the next
menu,“A”.
If no action is taken, the display
switches automatically to screen “A” after
one minute.
Immediate return to screen “A” if the trigger is
pressed.
1
1
2
2
F
