Index revision : A
13
7161
3. Characteristics
3.1. General characteristics
The structure of the cart provides support:
•
In the NDT version
: a pressure tank that can hold approximately 15 litres of fluidised pow-
der (i.e. approximately 5 to 7 kg of powder depending on density).
•
In HF version
: a pressure tank that can contain about 24 litres of fluidised powder (i.e.
about 10 to 12 kg of powder depending on density).
3.2. Air compressed quality
Characteristics of compressed air supply according to the standard NF ISO 8573-1:
*: Values are given for a temperature of 20 °C (68 °F) at an atmospheric pressure of 1 013 mbar
The filter installed on the "Inocart NDT/HF" is used to guarantee the correct operation of the
equipment, in case of accidental non-compliance with the network compressed air filtration
recommendations.
WARNING : (*) A pressure higher than 8 bar can cause malfunctions.
Total equipment consumption:
Dimensions of the ”
Inocart NDT
” (H x W x D)
1230 x 490 x 720 mm
Approximate weight (without powder)
40 kg.
Dimensions of the ”
Inocart HF
” (H x W x D)
1230 x 490 x 720 mm
Approximate weight (without powder)
45 kg.
Maximum dew point at 6 bar (87 psi)
Class 4 i.e + 3°C (37°F)
Maximum particle-size of solid pollutants
Class 3 i.e 5 µm
Maximum oil concentration
Class 1 i.e 0,01 mg/m
0
3
*
Maximum concentration of solid pollutants
Class 3 i.e 5 mg/m
0
3
*
"
Inocart
" equipment air supply pressure
7 bar +/- 1 bar (*)
NDT version
Injection from 0 to 100 and fluidisation at 50
85 l/min max
HF version
Injection at 80 and fluidisation at 43 on
Inobox
85 l/min whatever the posi-
tion of the shutter