SAMES KREMLIN A28, Руководство пользователя, Страница: 13 / 41

13
Environment on site
The equipment is installed on a horizontal, stable and flat floor (e.g.
concrete slab).
Non-mobile equipment must be fixed to the ground by suitable
fastening devices (spit, screws, bolts, etc.) to ensure their stability during use.
To avoid risks due to static electricity, it is necessary that the equipment and
its components are grounded.
- For pumping equipment (pumps, elevators, chassis...), a 2.5 mm
section wire is fixed on the equipment. Use this wire to connect the
equipment to the general "earth".
- In severe environments (insufficient mechanical protection of the
earthing wire, vibrations, mobile equipment, etc.) where
damage to the earthing function is likely to occur, the user must
replace the 2.5 mm wire supplied with a device that is better
suited to the environment (wire with a larger cross-section,
earthing braid, fixing by eyelet, etc.).
- Have a qualified electrician check for ground continuity. If
ground continuity is not assured, check the terminal, wire, and
grounding point. Never operate the equipment until this
problem has been resolved.
- The gun must be "grounded" through the air hose or fluid hose.
When spraying with a gun equipped with a cup, the air hose
must be conductive.
-
The materials to be painted must also be "grounded
- "They can be attached to the floor by means of clamps fitted
with cables or, if they are suspended, by means of hooks which must
be kept clean at all times.
All objects in the work area must also be grounded.