Safety instructions
582118110-EN-indG-Regulator-PaintCare-BPR-L.docx
15
Painting phase back pressure regulator and pressure gun
Mandatory wearing of PPE during this phase of painting
where the back pressure regulator, pump and the gun are
under pressure.
Do not look at the gun nozzle when it is under pressure.
Rinse at a maximum of 1 bar / 14.5 psi at the pressure gauge
of the air equipment (variable pressure depending on the
length of the pipes).
Rinsing the back pressure regulator
Wearing PPE (g safety shoes)
Do not look at the gun nozzle when it is under pressure
Rinse at a maximum of 1 bar / 14.5 psi at the pressure gauge
of the air equipment (variable pressure depending on the
length of the pipes).
Defusing the pump
PPE port mandatory.
Risk of hydraulic heating during defusing
Risk of overheating of the hydraulics in case of defusing.
Mass cable
It is mandatory to ground the back pressure regulator.
The input and output port are conductive.
