Doc.-ID: 181210-PT10BA-ES-RoughCam IPM3016_en_rev.00.docx, page 20 of 24
6
Network access and visualization
For a comprehensive user manual of the web surface, please refer to the to the Axis user
manual:
https://www.axis.com/files/manuals/um_m30_1741648_en_1709.pdf
At delivery, the RoughCam IPM3016 is set to the applicable net frequency (50Hz or
60Hz). If the camera is used at a location with a differing net frequency, a flickering of the
picture might be noticeable, particularly in surroundings with fluorescent tubes. In such a
case, the applicable settings have to be carried out within the menu “System Options >
Advanced > Plain Config”, requiring a system restart.
6.1
Browser Support
A list with the currently supported web browsers, operating systems, and required add-
ons can be viewed at:
http://www.axis.com/techsup/cam_servers/tech_notes/browsers.htm
6.2
Assigning the IP address
The RoughCam IPM3016 is an Ethernet network camera requiring an IP address to ac-
cess it. Usually a DHCP server is integrated in most networks which automatically as-
signs an IP address. In case there is no DHCP server available in the network, the
RoughCam IPM3016
’s default address “192.168.0.90” (subnet masking 255.255.255.0)
is used.
With the “AXIS IP Utility“ tool it is possible to determine the IP address with Windows; the
software as well as additional useful tools can be downloaded free from the homepage.
http://www.samcon.eu/en/info-center/drivers-software/
In case it is not possible to assign the IP address, it might be necessary
to change the firewall settings or to consult the network administrator!
The “AXIS IP Utility“ tool automatically recognizes all RoughCam devices and displays
them (also subnet overlapping). With this application also the static IP address can be set
manually. In this case, the RoughCam IPM3016 network camera should be installed in
the same network segment (physical subnet) as the PC on which the AXIS IP Utility is
executed.
