Doc.-ID: 220316-PT08BA-ES-ExCam XI410_en_rev.00.docx, Page 9 of 28
3
Safety Instructions
Please absolutely observe the
installation instruction’s
safety directions of the T08 ExCam series!
Quick link:
It is absolutely mandatory to adhere to the national safety regulations and regula-
tions for prevention of accidents, as well as to the safety instructions given below
in this User Manual!
Attention!
Cameras of type T08 ExCam are not suitable for use in zones 0 and 20.
The ambient temperature, temperature class and explosion group writ-
ten on the enclosure nameplate must be absolutely adhered to! The
customer is not allowed to make any alterations of the camera! The
camera must be operated in a proper and sound condition and only in
the way intended.
Attention!
Repairs may only be carried out by using original parts from the man-
ufacturer. Repairs which affect the explosion protection may only be
carried out in accordance with the nationally applied regulations and
exclusively by the manufacturer.
Attention!
The alignment of the camera to intensive energy sources (e.g. devices
which emit laser radiation or reflections of such equipment) can cause
an irreparable defect of the infrared detector. This is also valid if the
camera is switched off.
Attention!
Devices of type T08-VA0.x.K1.GER may not be used in mining/ fire-
damp hazard (ATEX group 1) or in areas with high risk of mechanical
stress (ATEX group 2).
Attention!
Prior to installation, take external sources of heat or cold into account!
The temperature ranges prescribed for storage, transport and operat-
ing must be adhered to!
