Doc.-ID: 220316-PT08BA-ES-ExCam XI410_en_rev.00.docx, Page 23 of 28
If you cannot assign the IP address, it may be necessary to check the
firewall settings!
With the option
“
port no. assign automatically
” a port number is assigned automatically.
If several cameras with different port numbers are connected and communication is to take place with a
specific camera, the corresponding camera can be determined by reacting to port number.
The authorizations of programs can also be activated retrospectively in the Windows firewall settings of
the PC (
Windows firewall
and
allow a program or feature through Windows Firewall
).
The port range used should be between
49152 ... 65535
. When using other ports, it is possible that
these are already reserved or assigned.
When using several XI80 cameras in one network, pay attention to the data rate:
Switch with 100Mbits/s: approx. 17 devices (XI80)
Switch with 1000Mbits/s: approx. 170 devices (XI80)
In addition to the data rate, you should also pay attention to the PC performance. A separate instance
is required for each device used.
The device is now ready for the Ethernet connection
and is listed in the menu
Devices
. The camera is iden-
tified by a network symbol and the network address
and port number. Select the device. A connection to
the device is established and the temperature meas-
urement can begin.
To change the corresponding address settings, go to
Devices
and Ethernet Settings
(TCP/IP) Settings
in
the menu.
The address for the device is assigned under
Device
address
. This must have a different address (last
block) to the other participant (e.g. PC) (
Send to ad-
dress
(local computer)). It is important that the network
part (first three blocks) must be identical for both ad-
dresses. The address range of the individual blocks
can be between 0 and 255.
In addition, a separate port number must be config-
ured. The selected number can be between 1 and
65535.
6.
5.
