Doc.-ID: 190409-PT08BA-ES-ExCam XF-Q1645_en_rev.01, Page 29 of 32
7.2
Assigning the IP address
The ExCam XF Q1645 is intended for use in an Ethernet network and requires an IP ad-
dress to access and control it. In the most today’s networks, a DHCP server is integrated.
This server automatically assigns an IP address.
If there is no DHCP server available in the network, the IP default address of ExCam XF
Q1645
is “
192.168.0.90” (subnet masking 255.255.255.0)
.
With the “AXIS IP Utility”, it is possible to determine the IP address under Windows; the
included USB stick contains this application.
If it is not possible to assign the IP address, it might be necessary to
change the firewall settings!
The “AXIS IP Utility“ tool automatically recognizes all ExCam devices and visualises
them in the device list. It can also be used to manually assign a static IP address. For this
purpose, the ExCam XF Q1645 network camera has to be installed in the same physical
network segment (physical subnet) as the computer on which the AXIS IP Utility is run-
ning. The network signature of ExCam XF Q1645 is "AXIS Q1645" (see Figure 7-1). MAC
address and serial number for clear device identification are also detected and displayed.
Figure 7-1 Axis IP Utility
7.3
Password/ Identification
The following user name is set at the factory:
root
The following password is set at the factory:
root
ExCam XF Q1645
AXIS Q1645
