SAMCOM FWCN30A, Инструкция по эксплуатации

Страница: 10 / 36

NOTE: There is no need to change the default GROUP number unless you either:
●
Are experiencing interference or cross talk from other radios or intercoms in the area on the current group channel, or
●
Desire advanced functionally by organizing your radios into groups that call all receive separate group
communications. For example, if you want three different buildings, each with its own group number.
This would be a more advanced configuration and is not needed for your average home or small office.
To change the GROUP Number
●
Press the MENU key 3 times, GROUP with group channel number will flash.
●
Press or to select new Group Channel
●
Press the GROUP/OK or PTT key to confirm and revert back to the main screen, or the MENU key to confirm
and continue next function setting.
12. VOX (Hands-Free Function)
The unit has a built-in Voice Activated Circuit (VOX) function. You can enjoy talking and listening without pressing PTT
key. To have better performance, you can use this function with the external earphone (optional accessories).
●
Press the MENU key 4 times, LCD displays
icon and VOX sensitivity digit will flash.
●
Press
or
key to select sensitivity level from “ , 1, 2, 3” for “OFF, Low, Medium and High respectively.
After turning on the VOX function, LCD will display icon. Press the GROUP/OK or PTT key to confirm
and revert back to the main screen, or the MENU key to confirm and continue next function setting.
Please speak close to the mic in order to activate VOX function.
14. SELECTING CALL TONE
●
Press the MENU key 5 times, LCD will display icon and call tone number will flash.
●
Press or to scroll between 1 to 10 and to select a call tone or turn off the CALL function.
●
Press the
GROUP/OK
or
PTT
key to confirm and revert back to the main screen, or the
MENU
key to confirm
and continue next function setting.
15 KEY BEEP ON/OFF
The unit has the function to turn the key beep on or off.
●
Press the MENU key 6 times, LCD displays the icon.
●
Press or to turn the key beep on or off
●
Press the GROUP/OK or PTT key to confirm and revert back to the main screen, or the MENU key to confirm
and continue next function setting.
16. ROGER BEEP
The roger beep function enables a short tone signal which is transmitted after releasing the PTT button.
●
Press the MENU key 7 times, LCD displays the icon.
●
Press or to turn the Roger beep on or off