SAMCOM FWCN30A, Инструкция по эксплуатации

Страница: 11 / 36

●
Press the
GROUP/OK
or
PTT
key to confirm and revert back to the main screen, or the
MENU
key to confirm
and continue next function setting.
WEATHER RECEIVER (WX) FUCNTION
The radio has the capability to tune in to broadcasts by the United States National Oceanic and Atmospheric Administration
(NOAA) Weather Radio and Environment Canada Weather Radio. You can listen to a weather channel or set your radio to
alert you to emergency weather broadcasts that interrupt routine broadcasts. When you listen to a weather channel,
you cannot use your radio in scan mode or for two-way communications.
Entering the WX Mode
●
In two-way radio mode with the main screen display, press and hold the key for 3 seconds to enter WX mode
, the LCD will display the icons and and the unit sounds a noise.
Setting the WX Channel
●
In WX mode, press
key 1 time unitl WX channel number flashes.
●
Press
or to select the appropriate channel with good reception in your area.
●
Press the
key to confirm and continue setting WX.
Setting the WX Alert
The radio can be set to respond to NOAA Weather Radion emergency meassages. A special alarm tone sounds an alert
and turns on the WX to give you immediate weather and emergency information.
●
In WX mode, press 2 times unitl the icon or flashes
●
Press or to turn the WX alert function On or OFF.
●
Press key to confirm and exit setting WX.
Exiting the WX Mode
●
In WX set mode, press and hold the key
for 3 seconds to exit WX mode and return to two-way radio mode.
●
After the WX mode is activiated either manually or by receiving an alert, if no keys are pressed for 5 minutes,
the WX mode will automatically revert back to two-way radio mode.
If you turn on the WX alert function and return to two-way radio mode, the LCD will display the icon on the
main screen in two-way radio mode, which means the WX alert function has been activiated and the radio can detect
the weather channel signal and two-way radio channel signal at the same time.
FRS Channel Configuration Chart
FRS
Channel
Frequency
(MHz)
Default Associated
Code
TX Power Option FRS
Channel
Frequency
(MHz)
Default Associated
Code
TX Power Option
1 462.5500 154 Hi/Low Optional 12 462.6375 146 Hi/Low Optional