FTAN10A SETUP INSTRUCTIONS
1.
Plug in and power on the device.
2.
Set a different number for each device.
Press and hold the "-" button for 5 seconds, and you will hear the sound "DU" twice. Then the
LCD will indicate "Group Call 0", and you will see a flickering "0". Press the “LOCK”,
“TALK”, or ”GROUP” buttons to go to the Channel number setting, and the LCD will display
"Channel 1" with a flickering "1". Select and press the number you want to set using the
keyboard (1-19 numbers available for setting), and press one of the buttons (LOCK, TALK, or
GROUP) again to complete the set-up.
3.
Place the devices to the corresponding rooms for use.
FTAN10A OPERATION
Select and press the number of the person you want to talk with, and the LCD will display
1
2
The receiver can answer or start a new conversation using the same method.
Notes: The LCD display turns red during all communications. The LCD display returns to
normal after the communication.
●
One-to-one
"Sel the number" you have pressed.
Press "TALK" to talk, and the receiver will hear your voice when you release the
button. The receiver can answer or start a new conversation using the same method above.
Tap "LOCK" to talk without pressing and holding the button, and press "LOCK" again talking.
3
