-
- 22 -
O
Capture Picture
O
Camera RC
5.4.2 Site Video Monitoring in Monitoring
Go to Monitoring, select an ongoing conference to be operated from the Conf
List drop-down, and then in the MT List, drag the MT to the monitoring window.
And the MT monitoring operations are not different from in Boardroom interface.
5.5 Site Polling
The site polling function means that the MCC plays the audio and video streams
of the selected MTs at a designated internal according to a certain sequence.
To make solution for polling
1
）
Click the <Polling> under the Boardroom interface;
2
）
Select an MT from the MT(s) Available box, then click >
3
）
Click
↑
( top),
↑
(previous),
↓
(next) or
↓
(bottom) in the MT(s)
Selected list to change the sequence;
4
）
Set polling interval: double click the member in the MT(s) Selected list
to modify or fill in a unified polling interval in General Polling Interval(s);
5
）
Set the count of polling: “0” indicates the unlimited number of polling;
6
）
Click <Save> to save the solution.
7
）
If With Audio is selected, the MT will be polled with video and audio.
To poll according the existing solution
1）
Select a solution in Solution drop-down,
2）
Click <Load>, and the original information will be loaded to the list;
3）
Click <Start>.
5.6 Conference Status
Go to Boardroom, click <Status> button, then the status of the current
conference are shown as follows:
O
Mixing: It shows the MT(s) in Mixing list;
O
Continuous Presence: The MT(s) in Continuous Presence (CP) list will be
