Operating manual
Tedder wagons OptiFEED
21
9.9.
OIL LEVEL IN THE GEARBOX
Every week oil level in the gearbox should be checked. It should oscillate between signs
MIN and MAX.
Change the oil every 6 months. Make sure there is no water in the oil.
Oil used by manufacturer: Gearbox oil F-15.
9.10.
REPAIRS: WELDING
Under no circumstances should the electric current flow through parts of weighing control
system. Open the box; disconnect wires of weight control system and sensor cords. Moreover,
welder clamps should be placed in the near vicinity of the welded place.
9.11.
STRUCTURAL CHANGES
No kind of structural changes should be made in OptiFEED fodder wagon without prior
arrangement with the manufacturer. Manufacturer is not responsible for damages, breakdowns, or
improper functioning caused by structural changes made.
9.12.
ELECTRONIC CONTROL *
*
Applies to mixer feeders equipped with optional electronic control.
Electronic control for mixer feeder OptiFEED is offered as optional equipment. Regardless
of the model and size, each mixer feeder can have electronic control to facilitate and improve the
machine control while preparing a uniform feed mix.
Controlling individual stages in the operation of the mixer feeder equipped with optional
electronic control is done by means of a clear-view control panel. The control panel also has push-
buttons with markings showing their corresponding functions.
Fig. 16.
Electronic control panel for mixer feeder
The electronic control panel is equipped with a large, clear display to show messages
regarding the machine's current work mode and on-screen buttons for individual functions. Below is
detailed description of the control panel “push and hold” buttons.
