23
OPERATOR’S MANUAL
ROTARY SNOW BLOWER
TORNADO
2
1
To adjust the chain tension, loosen the screws (
2
) and then use a tractor hitch to tension the chain
so that the clearance is 4-6 mm (see label N
–
148). After adjustment, tighten the screws (
2
) according
to
Fig. 15.
Points of check in the chain gear
5.3.4.
Lubrication points
Every 50 blower working hours lubricate blowing tube’s turntable and milling screw’s bearings on
both sides of the blower at the points shown in
LT43
grease.
Fig. 16.
Lubrication point of the machine
Lubrication
points
