Operating manual
Tractor mounted snow plow
Smart (K), Lite 150, Uni
-
19
-
The forces which are created in the plow at the moment of hitting or grazing an obstacle have
been presented in
Tab. 5
.
Depending on the type of an obstacle the stopping time may vary.
Tab. 6.
The working of the blade
This concerns the entire moldboard with the initial spring setting at 30 mm.
α
[º]
Fu [kg]
0
~ 120
15
~ 255
25
~ 315
35
~ 340
45
~340
55
~310
6.
OPERATIONAL MAINTENANCE
Every time before starting work:
make certain that the plow is properly connected to the tractor
check the condition of the hydraulic hoses and fittings,
check the hydraulic system and marker lights
check the level of wear on the blade insert and replace if necessary,
check the tightness of all bolts and nuts according to
Tab. 7
,
when installed adjust the height of support wheels or skids,
in the event of broken bolts or damaged parts - replace them,
Tab. 7.
Values of bolt tightness M
A
After 5 workhours:
check the condition of blade inserts,
check the condition of mount securing bolts and replace if necessary,
when installed adjust the height of support wheels or skids if necessary.
α
Fu
