Operator's manual
Self-loading gritter
Sahara
- 4 -
2.2.
Safety decals
NOTE!
Always comply with safety decals describing risks, and warning signs placed
on the machine.
NOTE!
All warning decals (labels) should be clean and legible.
Lost or damaged decals (labels) must be replaced with new ones.
New decals (labels) may be ordered at the manufacturer.
NOTE!
In the event of replacement of any sub-assembly should hold all warning
decals provided by the manufacturer.
Tab. 1.
Warning decals placed on gritter
1. N-3
Prior to operation
commencement read the
operator's manual carefully
2. N-4
Prior to approaching any
maintenance or repair
works, turn the feeding off
3. N-5
Caution chain gear – do not
take shield off with engine on
4. N-132
Never reach nor enter
hopper when machine is on
5. N-99
Do not remain in the gritter
tilt area
6. N-133
Do not drive on slopes
where vehicle may slip or
tilt
7. N-52
Wear protective gloves
8. N-40
Transport holder for
moving the gritter
9. N-129
Spreading rate adjustment with use of rear flap
10. N-130
Hydraulic engine rotating speed adjustment
