SaMASZ PT3 190, Руководство оператора

Страница: 23 / 28

23
OPERATOR ’ S MANUAL CIRCULAR SAW PT
10. WARRANTY CARD
CIRCULAR SAW – PT
The product quality has been checked and meets the required standards and regulations. The
circular saw is permitted for use
WARNING!
Warranty card
–
if not filled in, corrected or illegible
–
is not valid
.
11. WARRANTY TERMS
11.1. Warranty claim procedure
1. The manufacturer provides good quality and defect-free operation of the circular saw covered by
this
warranty if the circular saw’s operation is performed in accordance with this o perator's
manual.
2. Faults or damages to the machine found within 12-month period from the date of purchase shall
be removed free of charge at the purchaser’s or the manufactur e r’s.
3. Faults or damages should be submitted personally, on letter or by telephone. Repairs shall be
carried out within 14 days. Any repair which is subject to warranty should be carried out by an
authorized SaMASZ dealer.
4. Warranty claims regarding replacing of the product or repayment are considered within 14 days by
the Manufacturer.
5. The following cases are not covered by the warranty:
a) fortuitous events or other occurrence, for which the Manufacturer does not bear any
responsibility,
b) use of the circular saw for any purpose other than described in the operator's manual,
c) normal wearing of circular saw's operating parts,
d) high tractor's driving speed with the extension arm-saw aggregate mounted resulting in
violent, impact contact of the saw with the material to be cut,
e) high circular saw's loading due to large amount of tree branches, bushes or their large sizes,
f) cutting tree branches, bushes with diameter higher than Ø1 2 0 mm (Ø1 2 cm),
g) cutting long tree branches at their base, which causes the saw to be jammed in the material
cut,
h) locking one of the circular blades due to contaminations wound up on the hub,
Serial number
Date of manufacture
Manufacturer stamp
QC signature
Date of purchase
Dealer
’s signature
Dealer's stamp