SaMASZ P10-1200, Руководство оператора

Страница: 7 / 40

7
OPERATOR’S MANUAL TRAILED ROTARY TEDDER P10-1200
3.3. Standard equipment and spare parts
The tedders are sold with the following standard equipment :
❑
warranty card,
❑
operator’s manual with spar e parts list and Declaration of Conformity,
❑
PTO shaft,
❑
slow travelling vehicle board,
❑
spray paint (150 ml).
Tab. 2. Recommended PTO shafts for rotary tedders
Model
Power Length Moment
Symbol Clutch Manufacturer
KM mm Nm
P10-1200 21 1210-1733 270 8G5T085CE007001 friction Bondioli & Pavesi
Fig. 4. PTO shaft lubrication points
WARNING!
The frequency of lubrication of the articulated telescoping shaft should be
carefully adhered to. Points shown in
Fig. 4 should be lubricated every 50 hours.
The articulated telescoping shaft should also be lubricated before and after
longer periods of disuse
.
PTO shafts of other brands with equivalent parameters could be used after SaMASZ permission.
4. SAFETY ADVICE
4.1. Safety rules and regulations
❑
Operation without safety guards as well as with the damaged guards is not allowed.
❑
Start tedding only when the tractor’s PTO reaches its nominal rpm .
❑
Nobody is allowed to remain within the danger area of at least 50 m. Particular caution is necessary
when operating near roads and in stoney areas.
❑
Any maintenance and adjustment work should only be done after the drive has been disconnected
and the rotors are in standstill.
❑
When driving on public roads always comply with local traffic regulations, especially concerning
warning lights.
PTO shaft’s end without clutch
–
To be mounted on the
tractor’s side
PTO shaft’s end with
friction clutch – To be
mounted on tedder’s side