SaMASZ KW 141, Руководство оператора

Страница: 60 / 72

60
KWT, CAMEL, KOLIBER, KW, LAMA REAR EXTENSION ARMS OPERATOR’S MANUAL
❑
unscrew control panel with handles and links (Bowden’s links and hydraulic hoses feeding pump
should not be deflected),
❑
manner of mounting PTO shaft is provided in Fig. 69 ,
❑
then drive tractor away.
Fig. 68. Pressure reduction valve in unloading system
Fig. 69. WPT linkage after machine is detached from tractor
7. LUBRICATION
For lubrication joints of the machine use greases STP. Lubricate bearings of gear operation with
ŁT43. Do not use any plant or animal based grease. Prior to applying the grease clean out grease fittings
as well as lubrication points prior to grease application.
The following should be lubricated:
❑
rolling bearings of cutterbar rotor,
❑
joint pins.
After 2 h of operation:
❑
make sure whether nuts, pipe fittings and clips are well tightened.
Every 4 h of operation:
❑
apply grease into permanent grease fittings.
Every 8 h of operation:
❑
lubricate all eyes of hydraulic cylinders,
❑
examine pressure oil filter sucking (if the indicator is in red apply a new insert),
❑
examine proper operation of Bowden lines (if any line cuts occur, lubricate).