SaMASZ KDT 180, Руководство оператора, Страница: 14 / 44

Operator’s manual
Rear disc mowers
KDT
- 12 -
Fig. 6. Location of centre of gravity on mowers KDT
Tab. 4. Location of centre of gravity
Dimension
[ft in]
Model
KDT 180 KDT 220 KDT 260 KDT 300 KDT 340 KDT 341
A 2 ′ 5 ″ 2 ′ 4 ″ 2 ′ 8 ″ 2 ′ 4 ″ 2 ′ 4 ″ 2 ′ 4 ″
B 5 ′ 1 ′ 6 ″ 1 ′ 1 ′ 7 ″ 1 ′ 7 ″
C 2 ′ 9 ″ 3 ′ 2 ″ 3 ′ 4 ″ 3 ′ 5 ″ 3 ′ 7 ″ 3 ′ 7 ″
Dimension
[ft in]
Model
KDT 220 S KDT 220 W KDT 260 S KDT 260 SL KDT 260 W
A 2 ′ 9 ″ 2 ′ 9 ″ 2 ′ 8 ″ 2 ′ 8 ″ 2 ′ 9 ″
B 4 ′ 5.5 ″ 8 ″ 8 ″ 9 ″
C 3 ′ 4 ″ 3 ′ 6 ″ 3 ′ 5 ″ 3 ′ 4 ″ 3 ′ 7 ″
4.4. Working parts
Before operating the mower check knife’s and knife holder’s condition.
Worn or damaged knives or knife holders should be immediately replaced with new one.
4.5. PTO shaft
Before operating, read bar manufacturer's manual placed on the bar. Follow all safety
precautions in that manual.
Use only PTO shafts recommended by mower’s manufacturer with guards in good condition.
In order to operate safely, use only undamaged PTO shafts and shields. Damaged PTO shafts
and shields must be repaired or replaced with new ones before use.
4.6. Hydraulic assembly
Hydraulic assembly is under high pressure. Hydraulic oil under pressure may penetrate skin
and cause serious injury or death. Skin and eyes should be protected when working around this
assembly.
In case of injury caused by a liquid under pressure, call a doctor immediately.
Hydraulic hoses can be connected to the tractor's hydraulics provided that both the tractor’s and
the mower's hydraulic assemblies are not under pressure. To remove the pressure from the
hoses, start the tractor's hydraulic valves several times with the tractor off.