24
FISHER
HYDRAULIC FRONT-LOADER EXTENSION ARM
OPERATOR'S MANUAL
9.
REPAIR AND WITHDRAWAL FROM USE
Before any repair works, possibly related to admitting it for use, clean the machine thoroughly
and remove any grass, dirt or mud.
After having inspected all bolt connections and pins for clearance, assess whether the machine
is in proper operating condition. If after having replaced some worn parts, the machine can be operated
further, replace all remaining damaged parts with new ones. Also replace fasteners (bolts, nuts, cotters,
etc.) with new ones.
f the machine cannot be repaired any more, it should be withdrawn from use. To do so, drain oil
from hydraulic hoses (to special tight tanks) and deliver it to a proper waste treatment company. Clean
the machine parts, dismantle and properly dispose of all plastic parts. Deliver it to a proper waste
treatment company for reuse. Remaining metal parts should be delivered to a breaker's yard. After that,
the machine can be scrapped.
When dismounting the aggregate and during disconnection of assemblies and parts in
particular, follow all safety precautions. Perform dismounting works wearing protective gloves.
Withdrawal of dismounted parts should conform with valid environment protection provisions.
10.
WARRANTY CARD
CARRIER WITH HYDRAULIC EXTENSION:
Date of purchase
Dealer's stamp
Dealer's signature
The product quality has been checked and meets the required standards and regulations and is
permitted for use.
WARNING!
Warranty card without the required information or with corrected or illegible
information
–
is invalid.
Serial number
Date of manufacture
Manufacturer's stamp
QC signature
