36
ALPS / OLIMP
SNOW PLOW
OPERATOR’S MANUAL
6.
OPERATIONAL MAINTENANCE
ATTENTION!
The pin connecting the moldboards with the suspension body has self
lubricating bushings and does not require additional lubrication
.
Every time before starting work:
❑
make certain that the plow is properly connected to the tractor/track,
❑
check the setting of the tilt indicator f of the blade folding mechanism,
❑
check the condition of the hydraulic hoses and fittings,
❑
check the hydraulic system and marker lights,
❑
check the level of wear on the blade insert and replace if necessary,
❑
check the tightness of all bolts and nuts according to
❑
when installed adjust the height of support wheels or skids,
❑
in the event of broken bolts or damaged parts - replace them.
After 5 workhours:
❑
check the condition of blade inserts,
❑
check the condition of mount securing bolts and replace if necessary,
❑
when installed adjust the height of support wheels or skids if necessary
.
After finishing work:
❑
carefully clean and wash the plow.
Tab. 7.
Values of bolt tightness
