Sam4s NR-510B, Руководство по эксплуатации и программированию

Страница: 103 / 192

SAM4S NR-500 Series Manual Service Mode Programming • 103
of the image you wish to keep, you can undo (Ctrl + Z) and try again. You may
have to experiment a bit to resize the image inside the 384 x 192 pixel limit.
5. After the image is sized, select
Black and white
in the
Image Properties
dialog.
6. Save your image as type “Monochrome Bitmap (*.bmp,*.dib)” and confirm that
the size is 10k or less. If you resized your original image, you may wish to rename
when you save, so that you preserve a copy of the original image.
Use the PC Utility to Convert the Image
1. Install the PC Utility on your PC.
2. At your PC, start the PC Utility. (Select Start , Programs , SHC PC UTILITY ,
NR500PC
.) The
Store Setting
dialog box displays.
3. If you start the NR500 PC Utility for the first time, you must define a store name,
or if a store is already defined, you can select the store from the drop down list.
After the store is defined or selected, click
Close . The PC Utility program starts.
4. Move the bitmap (.bmp) logos you wish to use into the store directory
(i.e. C:\NR-500PC\storename.)
5. At the PC Utility, choose
Convert Logo Image
from the
Utility
menu. The Bmp
dialog box displays.
6. Click FILE OPEN . Select the bitmap image you wish to use from the Open
dialog and click the Open command button.
7. Click the SAVE AS PRE IMG or SAVE AS POST IMG button.
8. When the image is selected, click
OK
. Verify that the message “Save As
UserPre.Img” or “Save As UserPost.Img” displays. If the file is too large, and
cannot be loaded, the message “File Size Error” displays.