f.
Repeat from step 8.c to 8.e for the
remaining items. Then proceed to
step 8.g.
g.
Press the CASH key once all items
have been assigned to a group to
report its totals to.
9. Item Preset Price
Skip this step for all open items.
a.
Turn the key to the PGM position.
b.
Enter 200, then press the SBTL key.
c.
Press an item on the keyboard that is
going to have a preset price.
d.
Enter the preset price value without
using the decimal key.
e.
Press the X/TIME key.
f.
Repeat from step 9.c to 9.e for the
remaining preset items. Then proceed
to step 9.g.
g.
Press the CASH key when all preset
items have been programmed.
10. Preamble & Postamble Description
The pre & postamble both have 6, 16
character lines. You need to manually center
each line by spacing in before you enter the
first letter. When counting the total number
of characters being used per line, remember
to include the space between words. Use the
2 step formula below to figure out how many
initial spaces need to be entered before the
first letter.
Step 1) 16 – (# of characters used) = X
Step 2) X÷2 = # of initial spaces
i.e.
SNACK NOW
= 9 characters
Step 1) 16 – 9 = 7
Step 2) 7÷2 = 3.5, round up = 4 initial spaces
a.
Turn the key to the PGM position.
b.
Enter 700, then press the SBTL key.
c.
Enter the pre or post amble line
number that you would like to
program, see below:
Pre line 1 = 1………..Pre line 6 =6
Post line 1 = 7…….Post line 6 = 12
d.
Press the X/TIME key.
e.
Enter the initial spaces and the line
description. Use the double key (48)
before each character, including
spaces.
i.e.
SNACK NOW
double, space, double, space, double,
space, double, space, double, S,
double, N, double, A, double, C,
double, K, double, space, double, N,
double, O, double, W.
If you make a mistake use the
BACKSPACE key (60) to erase the
last character entered.
f.
Press the SBTL key after you have
entered the line description.
g.
Repeat from step 10.c to 10.g for the
remaining pre & postamble lines.
Then proceed to step 10.i when
finished.
h.
Press the CASH key.
i.
If you are not using integrated credit,
you are done programming your
register. Turn the key to the OFF
position and remove it from the
register for security purposes. If you
are using integrated credit, proceed to
the next section.
11. MCR Setup (credit)
Skip this section if you are not using
integrated credit.
a.
Turn the C key to the S position
which is located at 6 o’clock.
b.
Enter 70, then press the SBTL key.
c.
Enter 123, then press the CHARGE
key.
d.
Press the CASH key.
e.
Turn the C key to the PGM position.
f.
Enter 70, then press the SBTL key.
g.
Enter 21, then press the CHARGE
key.
h.
Press the CASH key.
i.
Enter 30, then press the SBTL key.
j.
Enter 27, then press the X/TIME key.
k.
Enter 2, then press the SBTL key.
l.
Enter 29, then press the X/TIME key.
m.
Enter the number that corresponds
with the MCR location. See below.
The MCR location is where the credit
card will be swiped.
DataTran = 0
Register = 2
n.
Press the SBTL key.
o.
Press the CASH key.
p.
Turn the key to the S Position.
q.
Enter 81, then press the SBTL key.
r.
Enter 1, then press the X/TIME key.
s.
Enter 2, then press the CASH key.
t.
Enter 5, then press the X/TIME key.
u.
Enter 10, then press the CASH key.
v.
Plug the DataTran into serial port 2
on the register.
w.
You’re done! Turn the key to the
OFF position and remove it from the
register.
