1. Load Printer Paper
a.
Load the roll of paper into the printer.
The paper must unroll from the side
closest to you. You must load the roll
of paper before continuing.
2. Clear The Register’s Memory
a.
Turn power off.
b.
Turn the C key to the S position
which is located at 6 o’clock.
c.
Press and hold the CHECK key.
d.
Turn on the register while holding
down the CHECK key. After the
register makes a single beep noise,
release the CHECK key.
e.
Press the upper left key (1), then the
lower left key (6), then the upper
right (Clerk #), and finally the lower
right key (Cash). Wait for the printer
to print: “RAM ALL CLEAR OK!”
before you proceed to step f.
f.
Turn the key counterclockwise to the
REG position.
g.
Enter 1, then press the CLERK # key
3. Date and Time
a.
a
. Turn the key to the PGM position.
b.
Enter 1300, then press the SBTL key.
c.
Enter the time using the 24 hr.format.
d.
Press the X/TIME key.
e.
Enter the date using the DD/MM/YY
format.
f.
Press the X/Time key.
g.
Press the CASH key.
4. Tax
a.
Turn the key to the PGM position.
b.
Enter the tax percentage rate. Use the
decimal key and make sure there are
3 digits after it. i.e. 6.500
c.
Enter 0.
d.
Enter 0.
e.
Press the TAX 1 SHIFT key.
f.
Press the CASH key.
5. Item Group Descriptions
a.
Turn the key to the PGM position.
b.
Enter 910, then press the SBTL key.
c.
Enter the group number you would
like to program (1-20).
d.
Press the X/TIME key.
e.
Enter the name of the group, up to 12
characters in length. i.e. Beverages
f.
Press the SBTL key.
g.
Repeat from step 5.c to 5.f for the
remaining groups. Then proceed to
step 5.i.
h.
Press the CASH key once all of the
group descriptions have been
programmed.
6. Item Descriptions
Place the Keyboard that has the item
locations over the register’s keyboard.
a.
Turn the key to the PGM position.
b.
Enter 300, then press the SBTL key.
c.
Press one of the items that needs a
description programmed to it.
d.
Enter the item description, up to 12
characters in length.
e.
Press the X/TIME key.
f.
Repeat from step 6.c to 6.e for the
remaining items. Then proceed to
step 6.g.
g.
Press the CASH key when all of the
item descriptions have been
programmed.
7. Item Tax and Preset/Open Status
a.
Turn the key to the PGM position.
b.
Enter 100, then press the SBTL key.
c.
Press one of the item keys that needs
to be programmed.
d.
Enter the number that corresponds
with the tax and preset options, see
below:
Preset Taxable = 6
Preset No Tax = 7
Open Taxable = 0
Open No Tax = 1
e.
Press the X/TIME key.
f.
Repeat from step 7.c to 7.e for the
remaining items. Then proceed to
step 7.g.
g.
Press the CASH key once all items
have been programmed.
8. Item Group Assignment
a.
Turn the key to the PGM position.
b.
Enter 150, then press the SBTL key.
c.
Press the item that needs to be
assigned to a group.
d.
Enter up to 3 groups. Use 2 digits per
group. i.e. 01.00.00 (group 1),
010300 (groups 1,3) 010304 (groups
1,3,4). All items have a default
setting of group 1.
e.
Press the X/TIME key.
