Sam SAM-EK1, Руководство пользователя

Страница: 7 / 11

Installing the wireless door/window contact
SAM-DW1 - Wireless Door/Window Contact
Specifications
- Avoid mounting sensors in areas with a large quantity of metal
or electrical wiring, such as a furnace or utility room.
- Place the transmitter in the desired location, mount the magnet
no more than 0.39 in (1 cm) away from the transmitter and secure
the transmitter and magnet with double-sided tape (included)
or screws (included.) The top of the door is recommended
on the side furthest from the hinge.
- Make sure the magnet is on the right side of the transmitter. The
two triangles visible on the sensor and the magnet should be next
to each other; as close as possible.
Power Supply
DC 1.5V (AA 1.5V LR6 Battery x 1pc)
315MHz ( 75KHz)
Static Current
Alarm Current
30uA
40mA
260ft (80m) (Line of Sight)
80% (Non-Condensing)
Transmitting Distance
Radio Frequency
ABS Plastic
14 F -(10 C)~131 F (55 C)
Housing Material
Operation Condition
Relative Humidity
2.8 x 1.3 x 0.6in (71 x 34 x 17.5 mm)
Transmitter Dimensions (L x W x H)
2 x 0.47 x 0.53in (51 x 12 x 13.5 mm)
Magnet Dimensions (L x W x H)
- Mount the transmitter on the door frame and the magnet on
the door. Make sure the SAM logo is at the bottom.
- Remove the battery activation strip.